Language
- English
- Русская версия

8×500KW Syngas Gensets in China

Keywords:

Category：

Email:

8×500KW Syngas Gensets in China

The syngas to power project is designed for utilization of the syngas from the pyrolyzer for power generation. Making full use of syngas as fuel for power generation, reducing environmental pollution, and improving energy utilization.
The Shengdong syngas fuelled genset is built as a compact package where engine and generator are connected through a coupling and are mounted to the base frame.
Shengdong engine features ‘IN-CYLINDER’ technology for syngas which mainly contains hydrogen and carbon monooxide. Four-stroke, air/gas mixture turbocharged, after-cooled, with high performance ignition system and electronically controlled air/gas mixture system.

Engine Model	J4190ZL	J6190ZL	J12V190ZL
Engine Capacity	100KW	200KW	500-700KW
Configuration	4-In Line	6-In Line	V 60°
Aspiration	Turbocharged, Inter cooled	Turbocharged, Inter cooled	Turbocharged, Inter cooled
Bore(mm)	190	190	190
Stroke(mm)	210	210	210
Ignition mode	Spark-Ignited	Spark-Ignited	Spark-Ignited
Engine Speed(rpm)	1000(50Hz)/1200(60Hz)	1000(50Hz)/1200(60Hz)	1000(50Hz)/1200(60Hz)
Starting Mode	24V DC	24V DC	24V DC
Total Displacement(Lit)	23.80	35.70	71.45

Typical syngas compositio

Tar	Particles	CO	H2	CO2	N2	CH4
< 10mg/Nm³	< 10mg/Nm³	15–20% by Vol	15–20% by Vol	8–12% by Vol	45–55% by Vol	< 3% by Vol

Common characteristics of this type of syngas:
● Major flammable compositions are CO (carbon monoxide), H2 (hydrogen) and CH4 (methane).
● Syngas composition is relatively unstable and can change from time to time.
● Raw syngas contains different comtaminants like tar, H2S, and dusts/particluers.
The Shengdong syngas generator sets are supplied with automatic control, with one key start, automatic grid connection, automatic load distribution, emergency and fault shutdown protection, and equipped with a remote monitoring system, which offers the benefits of unattended operation and only requires routine inspection.